Mountain Bikes


Duke FS

One of the lightest pivotless full suspension frames available on the market at just 4.5lbs, the Duke FS is designed for the discriminating cross-country rider, accommodating 29", 27.5" or 26” wheels. In the rear, the Duke FS is equipped with a Fox RP23 compression shock, complete with rebound and lockout settings, to fine-tune your ride; and in the front, the Duke offers an est. 1.75" of pivotless travel, just enough travel to take the edge off.

Handbuilt from the finest U.S. 3/2.5 Vr seamless radial aerospace titanium, specialty cold-worked and stress-relieved for increased stiffness and durability, the Duke FS features oversize, extra stout, tubing throughout, with s-bend seat and chainstays. A modular slider dropout upgrade also allows you to gear down to a single-speed drivetrain in seconds, and the Duke can also accommodate a Rohloff hub: the ultimate in internal gearing. 

MSRP: $3,200 (frame only) | Stock Sizes + Custom Sizes

  • Bottom Bracket: BSA 73 x English

  • Chainstay: Pivotless design

  • Dropouts: Paragon Breezer, Slider, or 142 x 12mm thru Axle

  • Finish: brushed finish with etched decals

  • Geometry: Stock or Custom ($500)

  • Head Tube: 44mm straight taper 

  • Material: straight gauged 3/2.5 titanium 

  • Tubes: Rider Specific to every frame

 

Colonel LT

Handbuilt with the finest U.S. 3/2.5 Vr seamless aerospace grade titanium, cold-worked and stress-relieved for increased rigidity and durability, with an oversized, extra stout, downtube for maximum stiffness. Curved tubes, size specific tubing, and custom geometry makes our hardtail truly tuned to individual riders. Available in multiple wheel sizes: 29", 27.5" or 26".

MSRP: $2,200 (frame only) | Stock Sizes + Custom Sizes 

  • Bottom Bracket: BSA 73 x English 

  • Dropouts: Paragon Breezer, Slider, or 142 x 12mm Thru Axle

  • Finish: Brushed with etched decals

  • Geometry: Stock or Custom ($500)

  • Head Tube: 44mm straight taper 

  • Material: straight gauge 3/2.5 titanium

  • Seat stays and chainstays: S-bend 

  • Tubes: Rider specific to every frame

 

Scout

Like the Colonel, the Scout is built with the finest U.S. 3/2.5 Vr seamless aerospace grade titanium, cold-worked and stress-relieved for increased rigidity and durability. It also features rider-specific tubing and multiple wheel sizes, 29", 27.5" or 26," yet comes in stock sizes with straight tubes only. 
MSRP: $1,700 (frame only) | Stock Sizes

Frame Specifications

  • Bottom Bracket: BSA 73 x English 

  • Dropouts: Paragon Breezer, Slider, or 142 x 12mm Thru Axle

  • Finish: Brushed with etched decals

  • Geometry: Stock Sizes only

  • Head Tube: 44mm straight taper 

  • Material: straight gauge 3/2.5 titanium

  • Seat stays and chainstays: S-bend 

  • Tubes: Rider specific to every frame